The Aqua-pH is an economical waterproof pH meter with pH, mV and Temperature readouts. It provides accurate, reliable measurements, and is very easy to use. Genuine one-touch calibration puts an end to time-consuming calibration procedures. The Aqua-pH comes with all the accessories needed for immediate use. A hard carry case is also available. Rugged and Reliable TPS has used the latest microprocessor electronics to totally eliminate all internal and external adjustments. The result is a dramatic increase in reliability. The unit is ideal for field or factory use. 24 Character Alphanumeric Display The two-line, 24 character display shows the pH or mV reading plus temperature simultaneously. Alternatively, a Large Digit mode is available. This shows one reading at a time at almost double the size. To simply use of the Aqua-pH, plain English prompts and error messages are provided. There are no codes to interpret like some other brands. One-touch Calibration Calibration of the Aqua-pH could not be simpler. Just place the pH electrode into any of the pre-selected buffers and press the Calibrate key. Repeat for a second point and that's it ! The Aqua-pH displays probe condition after calibration. All calibration information is stored in memory when the Aqua-pH is switched off, even if the battery is removed. Low Battery Drain The Aqua-pH will provide in excess of 100 hours of continuous use with an alkaline 9 volt battery. A handy battery-saver function switches the Aqua-pH off after 5 minutes if no keys have been pressed. This function can also be disabled for continuous operation. Temperature Compensation Correct temperature compensation is vital for accurate pH measurements. The operator can choose to use the Automatic Temperature Compensation (ATC) probe supplied or enter a temperature value manually. Temperature compensation in both cases is performed by the microprocessor for optimum accuracy.
Brand : TPS
