Free
Chlorine Portable Photometer with CAL Check
HI-97701
is an advanced portable photometer for the measurement of free chlorine in
water. This meter offers a superior optical system that utilizes a
reference detector and narrow band interference filters for extremely fast
and repeatable measurements.
- CAL
Check to verify meter performance
- Tutorial
mode for step-by-step instructions
- Choice
of powder or cost saving liquid reagents
Chlorine
is a common chemical used by many due to is disinfection, oxidation and
bleaching properties. In swimming pools, drinking water, and food
processing chlorine is used to disinfect and keep bacteria from growing.
In metal finishing it used as an oxidizer to convert cyanide in wastewater
to cyanate while in the pulp and paper industry it used to bleach wood
pulp so that paper is white. The HI97701 is designed to measure free
chlorine in water up to 5.00 mg/L (ppm).
The
HI97701 has an innovative optical system that offers superior performance
in accuracy, repeatability, and the short amount of time it takes to
perform a measurement. This compact, waterproof meter is extremely user
friendly with a tutorial mode that walks the user graphically, step by
step, in performing a measurement. The use of a backlit dot matrix LED
allows the use of virtual keys which makes the operation of the meter very
intuitive including selecting different methods, reviewing GLP data,
recalling the last 50 measurements, and customizing the meter to user
preferences.
HI97701
is completely waterproof including the cuvette holder that is designed
with ridges to protect the optical path from getting scratched by the
cuvette and a gasketed battery compartment that holds three common AA
batteries. The compact design fits comfortable in the hand for use in the
field or on a table for benchtop use. The LCD is 71 mm (2.75") by 37 mm
(1.6") and is backlit for easy viewing under all conditions.
- LED
that generates very little heat
- 8
nm narrowband interference filter that is accurate to +/- 1 nm and
offers 25% increase in light efficiency.
- Reference
detector that modulates the voltage to LED for consistent light
output.
- A
concave focusing lens that reduces errors from imperfections in the
cuvette
On-Screen
Features
CAL Check
With the use of our CAL Check standards the performance can be
verified and if out od specification have the calibration value
updated.
Tutorial Mode
When enabled, the tutorial mode will guide the user step by step
through the measurement process .
Method Options
For chlorine, the pre-programmed calibration curves are updated based
on a choice of either powder or liquid reagents.
Product
Name |
Free
Chlorine Portable Photometer with CAL Check - HI-97701 |
Free
Chlorine Range |
0.00
to 5.00 mg/L (as Cl2) |
Free
Chlorine Resolution |
0.01
mg/L |
Free
Chlorine Accuracy |
±0.03
mg/L ±3% of reading |
Chlorine
Method |
adaptation
of the EPA 330.5 DPD method |
Photometer/Colorimeter
Light Source |
Light
emitting diode with narrow band interference filter @ 525 nm |
Photometer/Colorimeter
Light Detector |
silicon
photocell |
Bandpass
Filter Bandwidth |
8
nm |
Bandpass
Filter Wavelength Accuracy |
±1.0
nm |
Cuvette
Type |
round,
24.6 mm diameter (22 mm inside) |
GLP |
date,
time of last calibration |
Display |
128
x 64 pixel B/W LCD with backlight |
Logging
Type |
automatic
logging |
Logging
Memory |
50
measurement |
Battery
Type/Life |
1.5V
AA battery (3 pcs.) / > 800 measurements (without backlight) |
Automatic
Shut-Off |
After
15 minutes of inactivity (30 minutes before a READ measurement) |
Environment |
0
to 50°C (32 to 122°F); relative humidity |
Weight |
380
g (13.4 oz.) with batteries |
Dimensions |
142.5
x 102.5 x 50.5 mm (5.6 x 4.0 x 2.0") |
Instruction
Brand : Hanna Instruments